High Density Polyethylene Film

HDPE SHEETS

HDPE Sheets
 
Colored HDPE Sheets
 
HDPE Cutting Boards
 
HDPE Film
 
HDPE Marine Board

Hdpe Balls

 

 
Contact

Privacy

 
Domestic Selling Policy

 

 

HDPE (High Density Polyethylene) Typical Properties

 

Physical Properties English  
Density 0.0338 - 0.0348 lb/in  0.948 g/cc
Apparent Bulk Density 0.021 - 0.022 lb/in   0.59 g/cc
Water Absorption 0.01 %
Moisture Vapor Transmission 0.965 cc-mil/100 in-24hr-atm
Environmental Stress Crack Resistance 10 - 5000 hour   1600 hr

Mechanical Properties
Hardness, Shore D 58 - 65   62
Tensile Strength, Ultimate 3480 - 6530 psi   30 MPa
Tensile Strength, Yield 2180 - 4350 psi   21.9 MPa
Elongation at Break 500 - 1000 %   840%
Tensile Modulus 116 - 144 ksi   0.86 GPa
Flexural Modulus 72.5 - 220 ksi   0.928 GPa
Izod Impact, Notched 1.5 - 14.1 ft-lb/in   3.7 J/cm
Tensile Impact Strength 152 - 228 ft-lb/in   380 kJ/m
Coefficient of Friction 0.28  

Electrical Properties
Electrical Resistivity 1e+017 ohm-cm
Surface Resistance 1e+017 ohm
Dielectric Constant 2.3
Dissipation Factor 0.0001 - 0.0005   0.0003

Thermal Properties
CTE, linear 20C 77.8 in/in-F
Melting Point 255 - 268 F   130C
Vicat Softening Point 226 - 264 F   120C
Brittleness Temperature -148 - -94 F   -86.2C

KMAC / TWS 616-406-0671  616-406-0682 Fax Email

Goods and services provided by K-mac/TWS Plastics (MI, USA).

Sold by 2CheckOut.com Inc. (Ohio, USA).